1
143241 (B)
Chapter 1 – Introduction
Product Overview
Xycom Automation industrial flat panel touch monitors offer state-of-the-art
performance and features while meeting the rigorous requirements of the plant floor.
Xycom’s 5017T high-resolution flat panel display reflects the latest “Smart Panel”
technology and is contained within a rugged housing with a resistive membrane
touch screen.
Standard Features
•
17” Flat Panel TFT SXGA supporting resolutions up to 1280x1024
•
2.85” mounting depth
•
Five-wire analog resistive touch screen with either RS-232 or USB interfaces
•
Front panel controls with on-screen menus (lock-out switch on rear of units)
•
24V DC input power (optional)
•
Stainless steel front bezel (optional)
•
NEMA 4/4x/12 front panel (when properly mounted)
Caution
Leaving your TFT LCD display on constantly can result in temporary image
retention (TIR). TIR can be avoided by using a screen saver, enabling the
idle/doze timeout feature, or by turning off the display when it is not in use.
Unpacking the Unit
When you remove the 5017T from its shipping box, verify that you have the parts
listed below. Save the box and inner wrapping in case you need to reship the unit.
•
5017T unit.
•
Installation Fasteners (14)
•
Analog RGB Cable (10 ft.)
•
RS-232C Cable (10 ft.) – supplied on units ordered with the RS-232C touch option
•
USB Cable (3 m) – supplied in place of the 10 ft RS-232C cable on units ordered
with the USB touch option
