Xybix Systems, Inc. • 8207 SouthPark Circle • Littleton, CO 80120 • 800.788.2810 • www.xybix.com
17
Copyright © Xybix Systems, Inc.
March 2019
WELCOME TO YOUR XYBIX FURNITURE
Heat Control
To turn “on” or “off” the heat on your console, find the
push button that shows three wavy lines, located on the
MyClimate hand controller. Simply press this button to
turn on the heating feature of your console. Please note,
this feature will also turn off if no motion is detected at
the console for more than 15min. Heaters can be
ajusted to “High” or “Low” by flipping the switch on the
bottom of the heater itself.
Lighting Adjustment
Similar to the fan feature, to adjust the lighting at your console, find the two knobs labeled with the
small light bulb located on the MyClimate hand controller. You will need to turn these knobs in a
clockwise motion. This will dim and brighten your task lighting. The further to the right you turn the
knob, the brighter the task light will become. Likewise, the further you turn the knob to the left
(counter clockwise), the more dim your lighting will become.
Filter Maintenance
The MyClimate system is equipped with air filters, similar to car
vent filters, which trap and lock dust and debris. From time to time,
these filters need to be cleaned and replaced. Xybix has made
this easy, with removable filters that can simply be washed.
First, ensure your fan speed is in the “off” position. Remove the
blue fiber filter clean by soaking in a warm soapy water mixture for
approximately 5min, then rinse with cool water. After the filter is
dry, replace the filter as it was found.