7
3. Output of power supply
should be 24V3A.
Heating stop
suddenly
1.Over temperature.
2.Loosed connection.
1. Protection turn on when
temperature is over 60
℃
.
Less than 60
℃
then
protection turn off.
2. Shut off power, reconnect
and then power on.
3. Time is finished, need
restart.
The chair doesn't
work.
1. The motors are connected
correctly or not
2. Power plug cable is good or
not.
3. Use suitable power supply or
not
1. Check the connection
according to the specification
2. Check that the power plug is
good or not, whether it is
plugged in or not.
3. Output of power supply
should be 24V/3A.
Chair suddenly
stops or fails
during operation
1.Overload
2.Wrong operation and disorder
of procedure
3. Loosed connection
1.Follw up the operation
manual.
2. Disconnect the power,
reconnect, wait for 2 minutes
then power on again.
3. Re-check the connector and
reconnect
