6
TURNING THE SPEAKER POWER ON/OFF and NFC MODE
1.
In standby mode, tap the POWER button to turn on the unit, the power
button backlight will light up green and begin blinking slowly.
2.
In power on mode, tap the POWER button to turn the unit off, the green
power button backlight turns off.
3.
At ON and Bluetooth mode the Bluetooth button light flashes blue and red
alternatively. Turn on the Bluetooth of your device to perform pairing in case
it fails to link with the previously paired device
4.
Turn on and using NFC Near Field Communication function.
When WOOMBOX is in ON mode and the NFC function is turned on, in
your Smartphone. Touch the backside of WOOMBOX with your Smartphone
and press the confirmation on your Smartphone to link wirelessly.
To unlink simply touch WOOMBOX again with your Smartphone.
Note:
Before first use, please charge the speakers for at least 4 hours
because the batteries may not fully charged, even though the charging LED
lights.
OOTH OPERATIO
BLUETOOTH OPERATION
Power on the unit and follow the directions below to use the A2DP profile Bluetooth
features of this unit.
Turn on the Bluetooth
At OFF mode, tap POWER button to turn speaker and its Bluetooth on.
The Bluetooth button light will flash red. It will start pairing with your Bluetooth device
after 7 seconds. Bluetooth light will flash red and blue. Blue light will flash when
pairing succeeded. At ON mode tap the POWER button to shut down and tap again
to turn on power and Bluetooth. It will link automatically with the previously paired
device.
Turn off the Bluetooth
In Bluetooth ON mode. Bluetooth will turn off automatically if linking was not
processed or the link has been interrupted for over 5 minutes.
