background image

 

 

 

IMPORTANT NOTES

 

Avoid installing the unit in locations described below: 

  Places exposed to direct sunlight or close to heat radiating appliances such as 

electric heaters. 

  Places subject to constant vibration. 

  Dusty, humid or moist places. 

 

NOTE: 

This product is not magnetically shielded and may cause color distortion on 

the screen of some TVs or video monitors. To avoid this, you may need to move the 

unit further away from the TV or monitor if unnatural color shifts or image distortion 

occurs. 

 

COMPLIANCE WITH FCC REGULATIONS 

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

(1) this device may not cause harmful interference, and   

(2) this device must accept any interference received, including interference that 

may cause undesired operation. 

NOTE : This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures: 
-  Reorient or relocate the receiving antenna. 
-  Increase the separation between the equipment and receiver. 
-  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

-  Consult the dealer or an experienced radio/TV technician for help

CAUTION:   

Changes or modifications not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment. 

 

 

 

 

 

Summary of Contents for WOOMBOX














Reviews: