XVC-ULTRA Encoder
User’s Guide
Page 47 of 50
6.
Navigate the system and select the image file to be uploaded. Click
Open
. The name of
the license file selected appears next to the
Choose File
button.
7.
Click
Upload
to upload the image file to the encoder. A series of progress messages will
appear in a new field –
Update Status
– that appears on the page, as shown in Figure 37
below:
•
“Loading”
•
“Saving”
•
“Validation”
•
“Rebooting” At this point, there will be a loss of connectivity with the encoder.
Connectivity will be restored following the successful completion of the boot process.
The rest of the process is similar 1to F/W upgrade (refer to section
Figure 37: Upgrade Status Field
8.
Access the encoder from your browser
using the newly configured IP address.
NOTE
You may need to clear cookies and site data from you browser before executing this step.
Resetting the Username and Password
To reset the username and password of web-based interface use the XVC Management Tool.
To assign a static IP address to the encoder:
1.
Execute the XVTEC Management Tool. The application discovers the XVTEC devices in your
network, and displays them in a list, as shown in the figure below.
NOTE
To enable discovery of the devices, you may need to disable the Windows Firewall before executing
the XVTEC Management Tool.
