XVC-ULTRA Encoder
User’s Guide
Page 14 of 50
Figure 4: List of XVTEC Devices Discovered
2.
Find the row in the table associated with your encoder. Right-click on the row, then select
Set IP
. The Set Device IP dialog box appears, as shown in the figure below.
Figure 5: Setting the Encoder IP Address
3.
Make sure that the IP Method selected is “Static”.
4.
Enter the encoder’s
IP Address, Subnet Mask, and Default Gateway
settings. Click
Apply
to save the new settings.
4.1.1.2
Assigning a DHCP-Allocated IP Address
To assign a DCHP-allocated IP address to the encoder:
1.
Execute the XVTEC Management Tool. The application discovers the XVTEC devices in your
network, and displays them in a list, as shown in the figure below.
NOTE
To enable discovery of the devices, you may need to disable the Windows Firewall before executing
the XVTEC Management Tool.
