24
Load Default:
If [Load Default] is selected, you can initialize the system to the ex-
factory default. Click “Load Default” and select items to be restored
Load Settings:
Load parameters in the removable storage device to the X2RxN.
Save Settings:
Save the set parameters of user’s the X2RxN to the removable
storage device.
IPC Upgrade
：
IPC can be upgraded by the connected the X2RxN. Decompress IPC
upgrading file and copy *.sw file to nvrupgrade directory and copy to the root directory
of U flash disk, as shown in Picture 4-41
—>Insert the USB flash disk into USB port of
the X2RxN
—>Select the IPC you want to upgrade—>Click Upgrade to start upgrading
IPC.
Note
：
Do not take out the USB memory or cut off the power during upgrading. When
the update is done, system will be automatically restarted. After about 5 minutes, the
upgrading will be finished. It is recommended to
load ex-factory default
after upgrading.
The auto maintain function can be effective only when the X2RxN returns back to Preview
mode with no any operation within the set auto maintain time. Also please note not all IPC
support firmware upgrade through the X2RxN.
4.2.5.1 Events
Go
to “Main Menu” → “Advance” → “Events” to enter into the interface.
4.2.6 Shutdown
Go to
“Main Menu” → “Shutdown” to enter into the menu interface.
Shutdown function requires user to login by inputting User Name and Password as
to shut down or reboot system.
Event Type:
Supports three abnormal
types: Disk Full, Disk Error and Video
Loss.
Enable:
Active alarms for abnormal
situations.
Alarm Out:
Enable or disable alarms
Latch Time:
How long the buzzer will
sound when external sensor alarm is
detected (10s, 20s, 40s, and 60s).
Show Message: S
et show message on
the screen when sensor alarm is
detected.
Buzzer:
How long the buzzer will sound
(10s, 20s, 40s, and 60s).
Send Email:
Select to send Email a
specified Email address when abnormal
events appear.
