XUANBAO XTC990A, User Manual

Page: 9 / 22

8
6. Operation Test
Works by press pneumatic supply of tire changer. Connect tire changer with
pneumatic supply according to manual .
6.1 Leak check about pneumatic supply
6.2 Glide block check under 0.8-1MPA ,shock
and unsmooth is not allowed.
Pneumatic valve towards up, HF200
towards up, too
The opposite is so. (fig E)
6.3 Parts flexibility check
7. Operation
Locking and dismounting tires conveniently, especially suitable for low-profile and
stiff tires, which make operation easier.
“ ! ” warning :
following parts should be installed plastic protectors before
operation : mounting head, lever, clamp and bead breaker.
“ ! ” warning :
please affirm whether the tire is equipped with sensor before
operation. If yes, please affirm model and position.
7.1 Loosen rim
If there is not sensor inside, separate outside tire and rim normally.
If there is sensor inside, operate according to its model and actual position. For
example, loosen from bilateral or loosen form inside separately.
“ ! ” warning :
Be careful! Forbidden pressing with bead breaker near sensor.