14
5)
Pull out positioning lock-pin, and then dismounting plate from straight arm
easier.(fig Y)
7.4 Installment
7.4.1Test before installment
1)
Check tire and rim according to tire
changer manual.
2)
If the sensor is attached to tire, make
sure it works well. If it doesn’t work,
please change another.
7.4.2 Inside tire installment
If the sensor is not attached to tire ,please
operate according to tire changer manual.
If the sensor is attached to tire, be careful and operate by following steps:
1)
Clamp rim from outside only.
2)
Move the column to the working zone
and positioning dismounting head.
“ ! ”warning :
Move and position column
only only leave HF200 unworked.
3)
Lubricate the rim (fig Z)
4) Lubricate edge of rim (fig AA)
5)Put the dismounting head at the right of sensor.(fig AB)
6)
Put inside rim under dismounting head (fig AB)
Summary of Contents for XTC990A
Page 1: ...USER MANUAL Aid Arm Perfect Assistant...
Page 19: ...18 Fig 01 Fig 02...
