XUANBAO XTC990A, User Manual

Page: 12 / 22

11
hexangular positioning screw(fig N-3) , move hexangular rod from turntable to get
ready for dismounting.
7.3.2 Dismounting outside tire
1) Positioning dismounting head
“ ! warning :
Position and move tire changer column only leave the column
unworked..Hexangular rod is only used during tire installment, keep it away from
working zone.
Following steps if stiff tire:
a. Move dismounting head (fig P-1) to
working position. If there is a sensor,
rotating turntable and put the sensor
in the middle of dismounting
head.(fig P)
“ ! ” warning :
Position and move tire changer column only leave column
unworked.
b. Loosen locking part(fig P-2)
c. Move hexangular rod (fig P-3) near the dismounting head. Keep pneumatic valve
(fig D-10) towards down and press the
tire . Leave enough room to position
dismounting head and insert lever.
“ ! ” warning :
Br careful and keep your
hands away from presser.