3
2
9.53
mm
(3/8)
1.3
mm(
.050”)
33
Links
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should
not be disposed of with household waste but
in an environmentally friendly way.
Please recycle where facilities exist. Check
with your local council authority for recycling
advice.
Recycling packaging reduces the need for
landfill and raw materials.
Reuse of recycled material decreases
pollution in the environment. Please recycle
packaging where facilities exist. Check with
your local council authority for recycling
advice.
Problem
Possible Cause
Remedy
Pole Pruner will not work
Battery is low in charge
Charge battery
Battery not inserted properly
Insert battery pack correctly
Dry chain
No oil in oil tank
Fill oil tank with chain bar oil
Oil tank cap breather blocked
Clean oil tank cap
Oil outlet blocked
Clear oil outlet
Chain or guide bar hot
No oil in oil tank
Fill oil tank with chain bar oil
Oil tank cap breather blocked
Clean oil tank cap
Oil outlet blocked
Clear oil outlet
Blunt chain
Sharpen or replace chain
Wont cut
Blunt chain
Sharpen or replace chain
Chain on backwards (chain
teeth pointing in the wrong
direction)
Remove chain and reinstall with
the teeth facing in the correct
direction
Worn chain
Replace the chain
Pole Pruner vibrating or not
cutting properly
Chain tension too loose
Adjust chain to correct tension
Blunt chain
Sharpen or replace chain
Worn chain
Replace the chain
Chain on backwards (chain
teeth pointing in the wrong
direction)
Remove chain and reinstall with
the teeth facing in the correct
direction
TROUBLESHOOTING
Battery Protection System
The tool is equipped with the battery protection system,
which helps to ensure a long service life.
The output power automatically cuts off during operation
when the tool and battery are placed under the following
situations:
• When tool is overloaded:
If this occurs, turn off the tool and let it cool down for
10 mins, remove the cause of overload, then resume
operation.
• When the remaining battery capacity
becomes low:
Recharge the battery pack.
Cleaning and Storage
•
Regularly clean the tensioning mechanism by blowing
compressed air onto or cleaning it with a brush. Do not use
any tools for the cleaning.
•
Keep oil away from the handle in order to ensure a secure
hold.
•
Clean the machine as necessary with a damp cloth and a
mild cleanser, if appropriate.
•
If the pole pruner is not used for an extended period of
time, remove the chain and bar oil from the tank. Briefly place
the chain and the guide bar in an oil bath and then wrap it in
oil paper.
•
Always replace the protective cover for transport or storage
of the pole pruner.
•
Never immerse the machine in water or other liquids in
order to clean it.
•
Store the pole pruner in a safe and dry place and out of the
reach of children.
Note:
The pole pruner warranty does not cover components
that have been subjected to operator abuse or negligence.
To receive full value from the warranty, the operator must
maintain the pole pruner as instructed in this manual.
Note: Ozito Industries will not be responsible
for any damage or injuries caused by the repair
of the Pole Pruner by an unauthorised person
or by mishandling of the Pole Pruner. This tool
is designed for DIY use - use in commercial or
industrial environments will void the warranty.
SPARE PARTS
Chain Replacement
The chain can be purchased through Ozito spare parts
or from your local Bunnings Warehouse. The correct
chain can be purchased by matching the pitch, gauge
and number of links as shown below:
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
