6
USING HEADPHONE DIVINE
Before using the headset, you must fully charge the battery and connect
the headset to your respective Bluetooth device.
CHARGING THE BATTERY
The headset contains a battery capable of up to 14 hours of usage. To
charge the battery, the headset has to be connected with the included
USB cable. The cable has two different sized ends.
First, take the Micro-USB end and plug into the USB entry port in the
right side of the headset. The other end of the cable is fitted with a
standard USB plug. Plug the end in the USB port of the computer, wall
charger, or other compatible devices with an USB port.
The indication light is on the right side of the headset. When the battery
is charging, a constant green light will be on. Once the battery is fully
charged, the green indicating light will be turned off.
TURNING ON YOUR
HEADPHONE
To turn the headset on, locate the multifunctional button on the right
side of the headset. The button is located next to the Micro-USB port on
the headset. Press the button and hold for 3 seconds and the indicating
light will show a blue flash followed by two red flashes. The headset is
now turned on (but not yet paired).
PAIRING THE HEADPHONE
WITH YOUR DEVICE
To pair the headset with your music player, ensure that the respective
device is turned on and the Bluetooth function is active. When setting
the headset for pairing mode, make sure the headset is off, and then
press the multifunctional button and hold for 5 seconds. The indicating
light will show the below process.
1. First the light will show a blue flash once.
2. Then for a few seconds it will flash red.
3. After red it will blink blue flashes and the headset is now in pairing
mode.
On your respective device you should search for the signal and use the
device’s functions to connect. On the list of found devices you select
”HeadPhone Divine” to establish the connection.
Some devices require a passcode to connect with a newly established
Bluetooth apparatus. Enter passcode: 0000 if necessary.
When the connection is established, the headset’s light indicator will
flash a blue light two times every 5 second to verify the connection.
PAIRING WITH NFC
BLUETOOTH
The headset has the NFC (Near Field Communication) Bluetooth
technology incorporated and can be used if your respective music
device is compatible. To pair with NFC, please follow the steps:
1. Enable the NFC function on your music device.
2. Gently let the headset and your music device meet, by holding
them close together. The NFC is located on the center of the left
earcup.
3. Your music device should now recognize the signal from the
headset.
a. If the music device and the headset are pairing for the first time,
you will need to accept the pairing on the music device
4. When the signal has been accepted on your music device, the
headset will be paired and ready for use.
