4
9. Playback
Right click the mouse in the live interface to pop up the menu toolbar. Click the little triangle button beside
button
to
set playback time
(eg. 5 minutes)
.
Then
click
button to play back the record from the past 5 minutes.
8. Manual Recording
Before recording, please install and format a HDD. Right click the mouse in the live interface to pop up the following menu toolbar.
Click
button
to
start
recording
.
(Fig 8)
►
After finishing the NAT settings, you can enter the NAT Server on the remote PC (Input
http://www.autonat.com
to go to the IE client).
If you are the first time to access the NAT, the network will download the ActiveX automatically. After installing ActiveX successfully,
it will pop up the login box:
NAT Access
Serial No
:
The MAC address of the NVR (Go to Main Menu
→
Information
→
Network
to
check
the
MAC
address of
the
NVR).
User Name
: The username of NVR. The default username is
admin
.
Password
: The password of NVR. The default password is
123456
.
Note: The web client must be in the remote network. It cannot be in
the same local network as that of the NVR.
②
Go
to Main Menu
→
Setup
→
Network
→
Network
.
Refer
to
Fig
1
.
You
can
obtain the
IP
address,
subnet
mask and gateway
automatically. You can also manually enter them according to the
actual network situation
.
Please
make
sure the
network
segment
is
the
same
as that of the network which is used.
③
Set
the
preferred
or
alternative
DNS
Server
.
Click “Apply”
to
save
the
parameters
.
④
Go
to
Main Menu
→
Setup
→
Network
→
NAT
tab
.
Refer
to
Fig
8
.
⑤
Enable
NAT
and
input
the
NAT
Server (The
default
NAT
Server
is
www.autonat.com
)
.
Click “Apply” to save the parameters.
