PRESET / CRUISING TRACKS
Presets
Sequential cruising, also known as „tour-function“: It runs through pre-defined points with individual speed
and duration settings. These points can be defined with the preset-positions:
Save a preset-position:
move the PTZ device to desired position, then press
Preset: N
[PRESET] + [N]+ [ENTER]
number between 0 and 255.
Call a preset-position:
to call a preset, press
[CALL] + [N]+ [ENTER]
The PTZ device will move the camera to the
requested preset position.
Delete a preset-position:
for deleting a saved preset, press
[DelPreset] + [N]+ [ENTER]
Sequence ( tour)
Most Speed-Dome camera and PTZ-devices supports memorizing preset positions. You can use this
keyboard to save and call the saved presets.
1
2
3
4
5
Preset points
Sequence 1
Call: N
DelPreset: N
Note: In order to setup the points for a sequence, you might need to setup the preset position at first.
This keyboard supports the setup of max. 4 sequence with 16 points for each. Some PTZ-Device or
Speed-Dome camera may not support this function. For details please refer to the operating manual for
further details.
Save a sequence:
enter the sequence setup by pressing [SEQ] longer than 3 seconds. LCD will
show following status:
SET SEQ n
Now enter the sequence ID (1 to 4) and press [ENTER] to enter the edit
mode
n indicates the sequence which currently is being edited, x shows the point the
number of presets contained in this sequence( max. 16).
EDIT SEQ
n SEQ x Preset
11
[N] indicates the current preset and can be any
XTS-2 CAM:001
XTS-2 CAM:001
XTS-2 CAM:001
XTS-2 CAM:001
