20
eXtrending your Vision
User Manual
(I)
Replacing Tuner (For ET7500)
The Xtrend ET7500 offers as standard a built-in DVB-S/S2 tuner with an additional tuner slot. The Plug and Play
DVB-S/S2, DVB-C and DVB-T/T2/C tuners are all pluggable. To protect your Electronic from unwanted static
discharges, they should be carefully handled only by the edge of the board.
Instruction
A.
Disconnect the power connection from your ET7500
B.
Remove 5 screws of the top cover -> Remove the screws by turning them counterclockwise(Refer image
in Figure 1 below)
C.
Remove the top cover by sliding backwards (Refer image in Figure 2 below)
D.
Remove screws of tuner bracket -> remove the screws by turning them counterclockwise (Refer image in
Figure 3 below)
E.
Gently remove the tuner from the main board if there are any installed
F.
After your desired DVB-S/-S2, DVB-C, or hybrid DVB-T2 tuner has been replaced, tighten the tuner
bracket with the a screw and put the top cover on again -> tighten the top cover with the screws by
turning them clockwise
[Figure 1]
