Operation Manual
61
Operation Manual
Operation
Standard Carriage Operation
The standard carriage uses manually adjustable forks and can
be tilted up or down by using the thumb stick on the control
handle.
Figure 73. Fork Ratings
(A) Maximum Load Capacity Rating (B) 24 inch Load Center
Warning
DO NOT use attachments that are corroded
excessively.
A
1
2
18408-001
AUX
CONTROL
AUX
CONTROL
FORK TILT
DOWN
FORK TILT
UP
JOYSTICK
ENABLE
BOOM
RETRACT
SWAY
LEFT
BOOM
EXTEND
SWAY
RIGHT
SW
AY
ENABLE
BOOM
LOWER
BOOM
RAISE
Figure 74. Attachment Tilt
Control Thumbstick (A).
(1) Attachment Tilt Down
(2) Attachment Tilt Up
Fork Positioning Carriage Operation
Caution
Do not adjust forks when the carriage is loaded. Adjusting
forks when carriage is loaded may result in loss of load or
carriage damage. Always use Fork Positioning (Aux Control)
buttons to adjust the forks BEFORE loading the carriage.
To move the forks outward, press the Aux Control top button
(1) on the front of the joystick. To move the forks inward, press
the lower button (2) on the front of the joystick.
Hydraulic attachments have a
maximum hydraulic pressure
rating. Failure to make sure the
attachment is equipped with
a pressure reducing valve, or
is rated to be equal or greater than 3,500 psi, which is the
maximum pressure of the Telehandler auxiliary hydraulic
system at the quick-disconnect couplers, could result in
death or serious injury.
Warning
When the Attachment Tilt Control Thumbstick is moved, it
activates hydraulic pressure through the quick attach couplers
(A) and (B) to move the carriage.
1
2
18408-001
AUX
CONTROL
AUX
CONTROL
FORK TILT
DOWN
FORK TILT
UP
JOYSTICK
ENABLE
BOOM
RETRACT
SWAY
LEFT
BOOM
EXTEND
SWAY
RIGHT
SW
AY
ENABLE
BOOM
LOWER
BOOM
RAISE
Figure 75. Auxiliary Control Buttons
