manualshive.com logo in svg

Xtreme xr1245, Operation And Safety Manual

Share
Download
Xtreme xr1245 Operation And Safety Manual Download Page 62

Operation

Operation Manual

62

2.  Raise the quick attach lock lever.

Figure 73.  Quick Attach Lock Lever. 

3.  With lock lever raised, insert quick attach pin completely 

through the attachment and quick attach adapter.

Figure 74.  Insert Quick Attach Pin Through Attachment and Quick Attach 

Adapter.

4.  Release the quick attach lock lever and make sure it has 

lowered and seated itself in groove (A) of the quick attach 

pin.

Hydraulic attachments have a maximum 

hydraulic pressure rating.  Failure to make 

sure the attachment is equipped with a 

pressure reducing valve, or is rated to be 

equal or greater than 3,900 psi, which is the 

maximum pressure of the forklift auxiliary hydraulic system 

at the quick-disconnect couplers, could result in death or 

serious injury. 

Warning

Figure 75.  Quick Attach Lock Lever and Quick Attach Pin. 

Figure 72.  Tilt Attachment To Align Holes (B) and (C) Between Attachment 

and Quick Attach Adapter.

B

C

1.  Tilt the attachment up slightly.  The quick attach adapter 

should be tight against the rear of the attachment.  Align 

the holes between the quick attach adapter (C) and 

attachment (B). 

Summary of Contents for xr1245













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands