Page 60
Xtreme Manufacturing, LLC
Operation
XR1045
2.
Tilt the quick attach adapter forward
3.
Extend the boom and/or drive the forklift forward
until pivot pins (A) are below and between the two (2)
attachment hooks (B)
Figure 7-22. Drive Vehicle Forward To Align Pivot Pins (A) With
Attachment Hooks (B).
4.
Raise the boom until pivot pins (A) have seated fully in
attachment hooks (B)
Figure 7-23. Raise Boom To Seat Pivot Pins (A) In Attachment
Hooks (B).
5.
Tilt the attachment up slightly The quick attach
adapter should be tight against the rear of the
attachment Align the holes between the quick attach
adapter and attachment
Figure 7-24. Tilt Attachment To Align Holes Between Quick Attach
Adapter and Attachment.
(A) Not Aligned. (B) Aligned.
6.
Raise the quick attach lock lever
Figure 7-25. Raise Quick Attach Lock Lever.
