Xtreme XR1045 Operation & Safety Manual Download Page 42

Page: 42 / 80

Page 40

Xtreme Manufacturing, LLC

Operator Cab

XR1045

Fuel Gauge

The fuel gauge indicates the quantity of fuel in the fuel

tank The total capacity of the fuel tank is 48 gallons (180

liters)

Figure 6-25. Fuel Gauge.

Oil Gauge

The oil gauge indicates the engine oil pressure

Normal engine oil pressure readings should be between

40 and 80 PSI
If the oil gauge shows abnormal readings, stop the forklift,

follow proper shut down procedures, tag the forklift with

“Do Not Operate” tags, and have a qualified mechanic

service or repair the forklift

BEFORE

placing it into service

again

Figure 6-26. Oil Gauge.

Coolant Gauge

The coolant gauge indicates the temperature of the

coolant in the engine cooling system After starting the

forklift, allow time for the coolant temp gauge pointer

to begin to move before operating the forklift After the

engine has sufficiently warmed up, normal engine coolant

temperature should read between 180 to 200°F

If the coolant gauge shows abnormal readings, stop the

forklift, follow proper shut down procedures, tag the

forklift with “Do Not Operate” tags, and have a qualified

mechanic service or repair the forklift

BEFORE

placing it

into service again

Figure 6-27. Coolant Gauge.

Light Switches

The Light Switches control two (2) front cab lights, two (2)

boom lights, and one (1 ) rear cab light Toggle the Light

Switches up (ON) or down (OFF)

Figure 6-28. Light Switches.

Turn Signal and Hazard Switches

The Turn Signal Switch controls the turn signals (toggle

left or right) The Hazard Light Switch flashes all four (4)

turn signals (toggle up or down)

Figure 6-29. Turn Signal and Hazard Light Switches.

Summary of Contents for XR1045

















































































Search results

Summary of Contents for XR1045

Reviews:

Brands by name

Popular brands

Xtreme XR1045, Operation & Safety Manual

Search results

Summary of Contents for XR1045

Reviews:

Brands by name

Popular brands