16" SCROLL SAWS
9
GB
Mounting the machine on a work bench
A workbench made from solid wood is better
than one made of plywood, as interfering
vibrations and noise are more noticeable with
plywood.
The necessary tools and small parts for
assembling the saw on a workbench are
not supplied with the saw. However, use
equipment of at least the following:
1. Machine
2. Bolt M8 (
×
3)
3. Flat Washer Ø8 (
×
3)
4. Rubber Pad
5. Work Table
6. Big Flat Washer Ø8 (
×
3)
7. Lock Washer Ø8 (
×
3)
8. Nut M8 (
×
3)
First of all, drill holes into the seating surface
and then Insert the screws.
A foam rubber base for reduction of noise is
not supplied with the saw either. However, we
expressly recommend that you use such a base
to keep vibration and noise to a minimum. Ideal
size 400
×
240 mm.
Operation
Horizontal Saw Bench and Diagonal Cuts
The saw bench can be positioned into a 45°
diagonal position or be left in the horizontal
position.
You can read off the approximate slope angle
by using the angle scale located under the work
bench. For more exact adjustment, use scrap
wood for some saw tests; adjust the bench if
necessary.
Bolt M8
(
×
3)
Flat Washer Ø8
(
×
3)
Rubber
Support Leg
Work Table
Big Flat Washer Ø8
(
×
3)
Nut M8
(
×
3)
Lock Washer Ø8
(
×
3)
Min: 0°
Lock Screw
Saw Bench
Angle Scale
Star Button
Setting the Saw Bench
5HOHDVH WKH VWDU EXWWRQ DQG EULQJ WKH VDZ
bench to a right angle in relation to the saw
blade. Use a 90° angle L-square measure
the right angle between the blade and the
bench. The saw blade be at 90° to the angle.
&ORVH WKH VWDU EXWWRQ ZKHQ WKH GLVWDQFH
between the blade and the 90° angle is at a
minimum. The bench should then be at 90°
to the saw blade.
Setting the angle scale
5HOHDVHWKHORFNVFUHZDQGEULQJWKHLQGLFDWRU
to the zero position. Fasten the screw.
Please note: the angle scale is a useful piece
of supplementary equipment, but should not
be used for precision work. Use scrap wood
for saw tests, adjust the bench if necessary.
OPERATION
Summary of Contents for 46006
Page 26: ...OF NOTE ...
