Xtreme Power 46006, Owner'S Manual And Safety Instructions, Page: 12 / 26

16" SCROLL SAWS
12
GB
Saw-blade with pin
Clamping Screw
Switch off the saw and remove the
mains supply plug before installing
saw blades in order to avoid injuries
caused by unintentional activation of
the saw.
1. Saw blade removal. Extract the saw-blade
by unscrewing the Clamping screw. Remove
the saw-blade from the upper and lower
support by slightly pressing the upper arm
down.
2. Inserting the new saw-blade. Lead one end
of the saw-blade through the perforation
in the table and insert the saw-blade pins
into the notch. Repeat this procedure at the
upper blade support. Before hooking it in.
Slightly press the upper arm down. Check
the position of the blade pins at the supports.
Tighten the blade by means of the Clamping
screw. Check the blade's tightness. Keep on
rotating clockwise in order to tighten the
blade even more.
Changing the Saw Blade with pins
MAINTENANCE
M
Upper Arm
General
Wipe chips and dust off the machine from
time to time using a cloth.
Re-application of the wax coating on the
workbench makes feeding the workpiece to
the blade easier.
The mains cable should be replaced immediately
if pulled out, cut or damaged in any other way.
Do not lubricate the motor bearings or internal
parts!
Warning! In the interests of operational
safety, always switch off the saw
and remove the mains plug before
carrying out maintenance work.
MAINTENANCE