OPERATION
Notice: The reverse rotation is only used to retract
the flexible shaft in the trapped state {Fig.4).
Figure4
Flexible shaft auto scaling
1. Press the forward and reverse rotation button R:
1) Press the speed switch lightly, move the handle
forward to the F position, and the flexible shaft will
be delivered forward (Fig. 5);
�
r
,-
�
,
6
�
f
7::
Figures
2) Press the speed switch lightly, pull the handle
back to the R position, and the flexible shaft will
retract backwards (Fig. 6).
t-
;:_
/-
i
-�
(�
!
Figure6
1.When the forward and reverse rotation button
R is pressed, the flexible shaft stretches
in the
opposite direction.
When the operating handle is in the N neutral
position, the flexible shaft stops stretching no
m�, '"
?�
-
�
i
r
" �·,
n
.
�
1
;1
1
1
Figure?
Pipe dredge (before operation, be familiar with
the antomatic scaling operation of the flexible
shaft, otherwise it will lead to personal injury or
damage to the tool)
I.Please place the tool head at a distance ofless than
150mm away from the pipe opening. If the distance is
too long, it will cause the flexible shaft to be twisted
and knotted; and do not place the tool head too close
to the pipe, which is inconvenient to observe the
condition of the flexible shaft (Fig. 8).
7
v
Figure8
2.Press the forward and reverse rotation button L, press the
speed switch slightly, pull the handle forward to the F
position, and the flexible shaft will be delivered forward to
start dredging; after dredging the pipe, pull the handle back
to the R position to retract the flexible shaft;
3.In the cases of blockage or blocked cornering of the flexible
shaft, pull back the handle to retract for a certain distance, and
then pull forward to deliver again. Repeatedly move forward
and backward the operating handle to dredge the pipe and
move through the corners. Do not force the delivery of the
flexible shaft, otherwise the flexible shaft will twist knotted or
be broken and cause serious injury;
2. If the blockage is too stubborn, apply the following two
methods:
1) Rotate the locking ring counterclockwise to obtain a
greater thrust. In this case, it is necessary to lightly press the
speed switch to closely observe the state of the flexible
shaft. If the flexible shaft is obstructed, twisted or knotted,
release the speed switch inunediately and stop the rotation.
Do not force the delivery of the flexible shaft;
2) Switch the operating handle in F and N positions, and
dredge the pipe slowly according to the actual situation.
Whether the pipe has been dredged or cannot be
dredged, you need to rotate the locking ring clockwise,
loosen the jaw, and retract the flexible shaft by the
automatic scaling function.
3 . If the flexible shaft is trapped in the pipe: that is, it cannot
dredge or be retracted, press the forward and reverse rotation
button R, and pull the handle forward to retract the flexible
shaft.
4.Notice: Situations of pipe blockage are varied,
it is necessary to closely observe the situation of the
flexible shaft when using it.
If
it is distorted or blocked,
stop the machine immediately, and then take different
operations according to the actual situation.
If
the pipe
cannot be dredged, please ask for professional for help.
Do not force the operation and cause unnecessary
troubles.
