9
GB
UNPACKING THE CONTAINER
1. Remove plastic wrap on crate.
2.
Remove restraining bolts (tee nut bolts)
from the beam. Use a 13mm wrench or
socket to remove the two hex bolts that
are securing the beam to the crate bottom
(as shown below). Please note that the two
hex bolts are located diagonally opposed
to each other.
5. Use a 13mm wrench or socket to remove
the two hex bolts that secure the engine to
the crate bottom (as shown below).
6.
Remove Tank & Engine Assembly from
crate, then remove the engine assembly.
3. Remove beam and cylinder assembly from
metal crate with assistance of a helper. Lift
beam and cylinder assembly to its vertical
position standing upright on the beam’s
footplate.
4. Use a 13mm wrench or socket to remove
the single hex bolt that is securing the tank
assembly to the crate bottom (as shown
below).
ASSEMBLY
SAFETY WARNINGS
Summary of Contents for 196CC
Page 27: ...27 GB PARTS INFORMATION ...