background image

Xtreme Power Conversion Corporation

XPD0215SL User’s Manual

Page 16

Power Distribution Unit

Helpful Info:

Use command “pshow” to display all power outlet status.

************************************************************

*         *

*         *

Power Outlet Port Parameters and Status 

 

 

*

*         *

*         *

************************************************************

>

>

Port |  Name        | status | Reserved By | Timer | AutoPing

------+-----------------+----------+-----------------+---------|-------------

01 |   encoder     | ON     | admin            | OFF    | ON

02 | 

Undefined | OFF    | Open             | OFF    | OFF

>

List of Power Outlet Status (Terminal Screen)

Power Outlet Timer Setup Menu

This is an example of the power outlet in Timer off mode. To enable the Timer, select “Timer Mode” on.

Power Outlet Timer Setup Menu (Web Page)

Timer Mode:

Select the timer mode: Off/Standard/Customized

Timer Start Time:

Specify starting time for the timer. The starting time is the actual calendar date and real-time clock. Once a timer 

reaches this specified Start Time, the power outlet on/off state will flip. It is in the format of “year:month:day:ho

Summary of Contents for XPD0215SL



























Reviews: