www.XtremeAirUsa.com
PAGE
9
2. PX05-I36 & PX05-I42
RANGE HOOD OPERATION
RANGE HOOD OPERATION
BEFORE YOU BEGIN
(important): this machine is equipped with TOUCH SENSITIVE CONTROL, so please
1. DO NOT PRESS. Only TOUCH & HOLD DOWN 2 SECONDS for every change makes.
2. TOUCH A WHOLE BUTTON only, please see below picture wrong vs. right
NOTE: For best results, start the range hood before cooking and allow it to operate several minutes after the
cooking is completed to clear all smoke and odors from the kitchen.
1. TYPE 1: TOUCH SCREEN CONTROL (PX06-I36 & PX06-I42 model ONLY)
1. TYPE 1: TOUCH SCREEN CONTROL (FOR PX02- models ONLY)
Note:
This range hood is equipped with remote control and smoke sensor that will self-calibrate within 5 seconds
when the range hood is first electrically activated. Self-calibration will be set when the range hood beeps. LCD panel
will turn off automatically after a period of inactivity.
A.
DROP 2 OIL TUNNELS: INTO INSIDE HOOD BODY
SLOT AT BOTH ENDS. REFER TO LEFT FIGURE
B.
INSTALL BAFFLE FILTERS; refer to Figure on the left
for the following three steps:
1.
Angle baffle filter toward side end of hood
2.
Lift a baffle filter up above horizontal level.
3.
Slide forward into slot.
To remove the baffle, please reverse the process.
RIGHT: a whole button is
covered by a finger
WRONG: Only half of a button
is covered by a finger
RIGHT
VS.
WRONG
10
