www.XtremeAirUsa.com
PAGE
11
1.
(1) To power ON/OFF, and to activate power-off delay timer.
2.
(2) To decrease blower (motor) speed, decrease timer value, and enter timer mode.
3.
(7) To increase blower (motor) speed, increase timer value, and cumulative timer reset.
4.
(3) Blower (motor) is running light indicator
5.
(4) Shows current blower (motor) speed (1-4).
6.
(5) Lights up when lights turned on.
7.
(6) To turns ON/OFF lights.
8.
(8) Indicates the accumulated time the system is running.
9.
(9) Indicates the length of time left for delay off function.
10.
(10) Lights up when auto-shutdown delay timer function is on.
A. Activating Blower Function:
* Option 1: Touch and hold down (+)for 1-2 seconds
* Option 2: Touch and hold down power sign (1) for 1-2 seconds
(the blower will be running at the same speed as last used)
Note: The system saves user configurations, settings such as timer and blower (motor) speed will
remain the same the next time it is turned on.
B. Adjusting blower speed:
* Touch and hold down (+) for increase
* Touch and hold down (-) for decrease
C. Turning off the blower:
*Touch and hold down power sign (1) for 1-2 seconds
D. To turn the light ON/OFF:
* Touch Light button once to turn on the lights, and once again to turn off the lights.
E. Adjusting the timer function:
1.
While the blower (motor) is not running, touch and hold Decrease Value button over 3 seconds to
enter timer mode.
2.
Adjust to desired period of delay off timer by touching Increase Value or Decrease Value
button
(minimum 1 minute to maximum 15 minutes). This setting will be saved immediately.
F. Activating the timer function:
* While the blower (motor) is running, touch and hold Power button for over 3 seconds to activate delay
off timer. Power-off delay indicator will light up and power-off delay digital timer will begin to
countdown, when it reaches zero, the blower (motor) will shut down.
G. To clear cleaning reminder:
•
When blower (motor) starts to rotate, cumulative running time will be shown in
Power-On Elapsed
Digital Timer
. This timer icon flashes when 30 hours is up and reminds user to clean the baffle filters.
•
After cleaning the filters and when the motor is not in use, touch and hold (+)
Increase Value
button
over 3 seconds to reset the timer. Please note that turning off the system will not reset the
Power-On
Elapsed Digital Timer
.
F. AUTOMATIC SHUT OFF:
•
MACHINE WILL AUTOMATICLY SHUT OFF AFTER APPROX. 2 ½ HOURS (FOR THOSE
MANUFACTURED AFTER AUGUST 2012 ONLY)
SPECIFICATION:
Body Design
Non-Magnetic 1.0 mm Stainless Steel, Satin Finish
Power Rating
120V/60Hz (USA & Canada standard)
General Input Power
154W (150W + 2x2W)
Motor Input Power
150 W each
Ampere
1.3 A
Levels Of Speed Control
4 Levels
Maximum Airflow
900CFM
11
