Xtramus NuTAP-311, User Manual

Page: 49 / 60

49
E-mail: sales@xtramus.com
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
B. Re-Direct Filter
– SDFR
SDFR
SDFR (Self-Discover Filtering Rules)
is a technology that makes packet capturing/filtering over Ethernet
easy and convenient. Each filter is independent and can be activated in any combinations.
SDFR
– Choosing SDFR Parameters
You can choose the criteria with the check boxes. The SDFR parameters available here includes:

DA: Destination MAC Address

SA: Source MAC Address

VID: VLAN ID

DIP: Destination IP Address

SIP: Source IP Address

DPort: Destination Port

SPort: Source Port
As mentioned above, each parameter is independent and can be activated in any combinations of DA , SA ,
VID , SIP , DIP , SPort , DPort , DA & SA , DA & SA & VID , DA & SIP , DA & DIP , SA & SIP , SA & DIP , SIP &
DIP , SIP & SPort , SIP & DPort , DIP & SPort , DIP & DPort , SIP & DIP & SPort , SIP & DIP & DPort , SIP
& DIP & SPort & DPort , VID & SIP & DIP & SPort & DPort , DA & SA & SIP &DIP , DA & SA & SIP & DIP
& SPort & DPort , and DA & SA & VID & SIP & DIP & SPort & DPort .
SDFR
– Rule Setting
The Rule Setting field allows you to set and input the value of DA , SA , VID , DIP , SIP , DPort and SPort .
The value of SDFR parameters can be set as Single , Pair , and Range . The following descriptions will us
DA as example.
Single: A single value will be used as SDFR
parameter.
Pair: Two values will be used as SDFR parameters.
Range: Values within the range of the two values set
here will be used as SDFR parameters.
SDFR
– Current Filter/Technical Terms
The Current Filter field displays the settings you
’ve made, while the
Technical Terms field displays the
explanations for DA , SA , VID , DIP , SIP , DPort , and SPort .
SDFR
– Button
Apply: Apply and save the changes you
’ve made on this page. After making any settings
on this page, you must click the Apply button or all changes will be lost.