37
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES
®
6.2. Quick Launch Buttons
These
Quick Launch Buttons
allow you to reconnect NuTAP-311, view counter/USC (Universal Stream
Counter) statistics and chart, set packet capturing criteria, and make Network Port A0/A1, Monitor Port
A0/A1 and system configurations. Please refer to the section down below for more detail descriptions
regarding to
Quick Launch Buttons
.
6.2.1. Reconnect
Function Descriptions
– Reconnect
If the connection between your PC and NuTAP-311
is down, a “
Disconnected
” icon
will be shown in “
System Connection Status
”.
Press
Reconnect
button
to re-establish the connection between your PC and
NuTAP-311. If the connection has been established successfully, a message window will pop
up, and the “
System Connection Status
” will be shown as “
Connected
”
.
6.2.2. Counter
Function Descriptions
– Counter
The
Counter Report
button located on the
Quick Launch Buttons
allows you to view
Network Ports and Monitor Ports
’ counter reports and charts on the
Main Display Screen
.
You can save the test statistics here as well. For more detail information, please refer to
6.7.
Counter Report
.
6.2.3. USC (Universal Stream Counter)
Function Descriptions
– USC
Each of NuTAP-311
’s Network Port supports two sets of
Universal Stream Counter (USC)
.
The
USC
button located on the
Quick Launch Buttons
allows you to view USC statistics on
the
Main Display Screen
. You can save the USC statistics here as well. For more detail
information, please refer to
6.8. Universal Stream Counter (USC) Report
.
6.2.4. Cap, A0/A1
Function Descriptions
– Cap, A0/A1
The
Cap, A0/A1
buttons located on the
Quick Launch Buttons
allow you to capture
packets flowing through
Network Port A0/A1
. For detail description regarding to this
function, please refer to
6.1.3. Report
,
Capture Network Port A0/A1 Packets
.
