47
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES
®
5.3.2.2. Menu Bar
– Task
Task
Get Task
This function allows NuSet-MiniPG-Config to access all test settings (Run) from
NuStreams-P5G or NuStreams-P9A and show those settings in both
Info/Run
Select List
and
Main Display Window
.
Add Task
As mentioned in sections above, each Run can hold up to
4
different Tasks. You
can add new Tasks to each Run with this function. To add a new Task, click the
Run you would like to add the new Task to from
Info/Run Select List
, then click
Task
→
Add Task
on the
Menu Bar
.
Delete Task
You can delete an existing Task with this function. To delete an existing task,
click the Task you would like to delete from
Info/Run Select List
, and click
Task
→
Delete Task
on the
Menu Bar
.
Apply All
Apply and
save all changes you’ve made to NuStreams-P5G or
NuStreams-P9A.
＊
Please note that the connection (of mini-USB cable) between PC and NuStreams- P5G must be connected at
all time while getting/setting tasks.
5.3.2.3. Menu Bar
– Log
Log
Get Device Log
Accessing test logs from NuStreams-P5G or
NuStreams-P9A
’s memory and save these
logs to a specific folder on your PC. After
retrieving test logs from NuStreams-P5G or
NuStreams-P9A, the log folder will pop up.
Also, a message window contains detail
information about system log file memory
buffer will pop up. Click
YES
if you want to
clear all stored logs or click
NO
to cancel.
Clear Device Log
Clear all test logs stored in NuStreams-P5G or NuStreams-P9A
’s memory.
Log Saving
Settings
Log saving settings can be configured
here:
Save Log to Device:
If this
function is
ON
, all test logs will
besaved in its log file memory
buffer.
Warning when Log storage
space is full:
System will issue a
warning if the log file memory buffer
is about to full.
Show Log Folder
Show the file folder where test logs are stored.
Set Log Folder
Change where you would like to save test logs retrieved from NuStreams-P5G
or NuStreams-P9A. You can create new folders for log-saving as well.
