Xtramus NuStreams-P5G User Manual Download Page 20

Page: 20 / 73

E-mail: [email protected]

Website: www. Xtramus.com

XTRAMUS TECHNOLOGIES

4. Making Settings with Front Panel Buttons & LCD

All parameters for DUT tests can be configured via control buttons located on the front panel. Also,

configuring, testing, and system information are displayed and can be viewed on the LCD screen as well.

Before performing any tests, NuStreams-P5G or NuStreams-P9A should be connected to DUT properly

according to DUT

’s type. Please refer to

3. Hardware Installation of NuStreams-P5G & NuStreams-P9A

for more detail information.

4.1. NuStreams-P5G Front Panel Buttons & LCD

4.1.1. NuStreams-P5G Buttons Overview

With NuStreams-P5G

’s control buttons located on its front panel, all test parameters and system

configurations can be set via these buttons.

Buttons Descriptions

Configuration

Buttons

Enter the Main Menu(*) or return to the previous Menu

Move the select cursor up

Move the select cursor down

Execute the selected selection

Operation

Buttons

Pause

Pause the current running test

►

Run1

Start all Tasks set in Run 1. Up to 4 Tasks can be configured in
Run 1 hotkey. Press this button to test

ALL TASKS AT ONCE

►

Run2

hotkey that works as Run 1

►

Run3

hotkey that works as Run 1

*Menu and setting options will be displayed on the LCD screen.

Summary of Contents for NuStreams-P5G










































































Search results

Summary of Contents for NuStreams-P5G

Reviews:

Brands by name

Popular brands

Xtramus NuStreams-P5G, User Manual

Search results

Summary of Contents for NuStreams-P5G

Reviews:

Brands by name

Popular brands