59
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®
7.9.7. Jitter Test
Jitter
test measures the variation of latency during the DUT’s test. If the latency doesn’t vary, then the
Jitter’s value will be positive.
Test method:
The
Jitter
test checks packet tags to verify that packets transmitted by other ports are received correctly,
whether they are received in the correct sequence, and whether there are missing packets. DApps-QoS
inspects the sequence tracking number in each frame to determine if frames were received in sequence.
The load generated by NuDOG series can be customized with different packet lengths and for specified
period of times.
Test Iterations
Continuous
Click to activate continuous testing with the same settings.
Duration (Secs)
The duration of time (in seconds) for the test. The range for the testing time is
1~5000
.
Number of Trials
The number of times of the test. The range for the number of times of the test is
1~100
.
Tx Rate
The rate of packet transfer. You can also set the load unit in percentage or
Mbps here.
Maximum
Receive
The maximum limit to receive packets in Mbps/sec.
