Xtralis Pty Ltd
XCC Product Guide
www.xtralis.com
iii
Codes and Standards Information for Air Sampling Smoke Detection
We strongly recommend that this document is read in conjunction with the appropriate local codes and standards
for smoke detection and electrical connections. This document contains generic product information and some
sections may not comply with all local codes and standards. In these cases, the local codes and standards must
take precedence. The information below was correct at time of printing but may now be out of date, check with your
local codes, standards and listings for the current restrictions.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one
or more of the following measures; re-orientate or relocate the receiving antenna, increase the separation between
the equipment and receiver, connect the equipment to a power outlet which is on a different power circuit to the
receiver or consult the dealer or an experienced radio/television technician for help.
FDA
This Xtralis product incorporates a laser device and is classified as a Class 1 laser product that complies with FDA
regulations 21 CFR 1040.10. The laser is housed in a sealed detector chamber and contains no serviceable parts.
The laser emits invisible light and can be hazardous if viewed with the naked eye. Under no circumstances should
the detector chamber be opened.
European Installations
The product must use a power supply conforming to EN54: Part 4.
EN54-20
This product is compliant with EN54-20 sensitivity requirements, provided that a pipe network conforming to the
design parameters provided in Chapter 2 is used.
Lloyds Register
MRN version for applications defined as Marine, offshore and Industrial. May be used in environmental
categories ENV1, ENV2 and ENV3 as described in Lloyd’s Register Test Specification No. 1:2002. The
specified standard to which the LR type approval relates is EN54-20 but the XCC-0100-MRN product is not
CE marked to this standard which is formally intended for buildings.
Product Listings
l
LPCB
l
VdS
l
CE - EMC and CPD
l
EN54-20 : Class C - 12 Holes / Threshold I
l
EN61000-6-3
l
EN50130-4
l
Lloyds Register - MRN version only
Regional approvals listings and regulatory compliance vary between Xtralis product models. Refer to
www.xtralis.com for the latest product approvals matrix.
Document: 14159_07
Part Number: 29185
Summary of Contents for XCC-010
