VIS-IR Thermography Detector Product Guide
Xtralis
36218_A2
11
Figure 10: Wiring Diagram
Power
There are two sets of power terminals on the junction box. Connect a 24 VDC power supply which is compliant
with local fire protection codes and standards to the PWR IN socket, and if required loop out to another detector
via the PWR OUT socket. The detector will not operate if the power supply polarity is reversed.
When powering multiple detectors, the installer should ensure that the total power consumption should be less
than 120W, so it is possible to connect 5X detectors.
Figure 11: Multiple Detectors Powered by a Single Power Supply
