Xtralis ICAM IAS-2, Product Manual

Page: 21 / 38

ICAM by Xtralis IAS-2 Product Guide
www.xtralis.com 15
5.8 Standard Configurations
Figure 5-5: Example of IAS-2 system with two pipes.
For this standard configuration, the pipes should be balanced, i.e. be of equal length and have equal size and
number of holes.
The use of additional bends as described in Section 5.5 will have a minimal effect on performance (response
time).
Note: Please see the table in Section 9 for AS 1603.8 hole and pipe length limits for certified detectors.
These limits describe pre-tested and acceptable system design values for the standard pipe
configurations described in this section, for each type of certified detector.