Xtralis ADPRO Presidium, Installation And User Manual

Page: 62 / 122

Installation and User Manual ADPRO Presidium by Xtralis
50
Doc. 12384_05
4.4.2 Setup Utility No Activity Timer
The Presidium Setup Utility will automatically disconnect the connection to a Presidium if no
mouse movement is detected within a 5 minute period. This action is performed to ensure the
Presidium’s detection is enabled.
Note: When the Setup Utility is connected to a Presidium, the following outputs and on-
screen monitor output displays are not updated. This means they will retain and
display there last state.
• Target Trucks
• Target Bounding boxes
• Trigger areas
• Contrast level
• No video alarm
• Contrast alarm
• VMD alarm
• General alarm output
Presidium detection is also disabled when Setup Utility is connected.
4.4.3 Using the Setup Utility
Figure 41: Enter Password
1. Enter the password;
Presidium (standard): Enter the password (default = admin) and select OK.
Presidium Mini: Enter username (default = admin ) and password (default = admin ),
select OK .
(Note that the defaults should be changed to a user defined a new username or password,
refer to
Authentication on page 68).The following screen is then displayed.