Xtralis ADPRO Presidium, Installation And User Manual

Page: 96 / 122

Installation and User Manual ADPRO Presidium by Xtralis
84
Doc. 12384_05
Example IP Addresses:
• If the FastTrace / FastTx / FastTrace-R IP address is 192.168.5.10, and the subnet mask is
255.255.255.0, a compatible Presidium IP address would be anything starting with
192.168.5.x (e.g. 192.168.5.11). The Presidium subnet mask should then be set to
255.255.255.0.
• The FastTrace/DVR IP Address on the HLI tab (refer to High Level Interface Tab on
page 67) should be set to 192.168.5.10.
• The Status Tab on the Presidium setup will indicate whether the Presidium has connected
to the FastTrace / FastTx / FastTrace-R (in the High Level Interface section ‘Connected to
FastTrace/DVR - yes/no”)
The following IP Addresses must be changed (in the following order):
• Presidium IP Address. Refer to Network Tab on page 66 for instructions to change the
Presidium IP Address.
• FastTrace / FastTx / FastTrace-R IP Address. Refer to the FastTrace / FastTx / FastTrace-
R User Manual (Communications section) for instructions to change the transmitter’s IP
Address.
• The Site IP Address used by VideoCentral to communicate with the transmitter. Refer to the
FastTrace / FastTx / FastTrace-R User Manual (Setting the Network Connection section) for
instructions.
• PC IP Address (if further configuration is required). Refer to Configure the PC Network
Connections on page 45.