XO I/O Interface USB Module – Technical Manual
ADPRO
14
32688_02
To connect and map the XO I/O Interface USB modules, proceed as follows:
1.
If you have not done so already, log on to the hardware configuration tool.
2.
Connect the XO I/O Interface USB module to the XO device using the provided USB cable: insert one end
into the module, and the other end into a free USB port on the XO device.
Note
If you are using a double module, Xtralis recommends to connect and map each module
separately. Because the modules all appear with the same name in the
Product
column
(
MIO CARD
), this will prevent incorrect mapping.
3.
In the hardware configuration tool, click
Refresh
. The module will now appear in the list, with the
Device
Node
column empty.
The example below shows a device that already has a first set of MIO/EIO cards:
MIO-1
is already
configured. The row above (
- - -
) indicates the newly connected module that needs to be mapped.
