iFT Series Hardware Installation Manual
ADPRO
60
27817_05
14
Power Consumption
The estimated power consumption depends on the installed components and on the system load:
Motherboard
12 W
Processor
65 W max.
Seagate SV35 hard disk
10 W
MIO card
1 W
Example for a 2-disk device (with maximum values):
Motherboard
13 W
Processor
65 W (PH10LU with Core i7/4770-S microprocessor)
2 Seagate SV35 hard disks
20 W
MIO card
1 W
TOTAL
on secondary circuit: 100 W
on primary circuit:
(total power consumption divided by 0.78 –
this is the efficiency of the power supply)
128 W (0.56 A / 230 VAC)
Note
Measurement on an iFT-E* device (with PH10LU motherboard and i7 microprocessor) produced the
following results: 0.2 A at 230 VAC → 46 W (idle state).
(*) configuration = iFT-E with 2 hard disks (4 TB per disk).
