iFT Series Hardware Installation Manual
ADPRO
40
27817_05
8.3
Mapping the XO I/O Interface USB Module
To connect and map the XO I/O Interface USB module, proceed as follows:
1.
First, connect the XO I/O Interface USB module to the XO device using the provided USB cable: insert one
end into the module, and the other end into a free USB port on the XO device.
2.
In the hardware configuration tool, click
Refresh
. The MIO and EIO card in the module will now appear in the
list, with the
Device Node
column empty:
3.
The first row is the EIO card: set the
Device Node
to
ttyU7
.
