Xtracycle Swoop 2021, Assembly Manual

Page: 13 / 14

13
43
Insert the U-tube into the frame, pushing in on the spring pin
button so that the button slides into the frame as well. Insert
the U-tube far enough for the spring pin to pop out into the
hole on the bike frame. (Optional: You can apply grease to the
portion of the U-tube being inserted.)
44
Insert the rail on the other side of the frame.
45
If you loosened the tailpiece to install the U-tubes, tighten
the tailpiece into place.
46 - Complete assembly
After ensuring that the brakes and gears are set to your
preference, tie down the two hook and loop straps on the
bottom of the FreeLoader Too bags to the bike frame.
Your Swoop assembly is now complete.
Looking to install additional accessories?
Please refer to the following page on the Xtracycle
wesbite for links to additional installation manuals:
https://www.xtracycle.com/product-manuals/