Xtracycle Swoop 2021, Assembly Manual

Page: 10 / 14

10
32
Rotate the handlebar grips into a comfortable upright
position and secure into place using a 3 mm Allen wrench.
33 - Connect the cycling computer
Place the wire hanging off the front of the handlebars into
the Shimano Cable Tool TL-EW300 which is located in the
small parts box. Holding the cable tool, connect the wire into
the handlebar computer.
34
You will hear a click when the wire has been attached
completely.
35
Tuck this wire into the wire wrap with the other cables to limit
the amount of wire dangling in front of the handlebars.