Chapter 1
General Information
Owner’s
Manual of BECS- A15 Computerized Control System
5
13.
Repetition Embroidery
The user can increase embroidery productivity by using the function of repetition
embroidery, which can also be used with cyclic embroidery.
14.
Cyclic Embroidery
With this function, the machine can automatically return to the origin and start the
same embroidery again when finishing the pattern one time. User also can increase
productivity rapidly by combining this function with special pattern-making function or
repetition embroidery function.
15.
Pattern Compiling
(1)
Compiling the Data of Selected Pattern to Generate New Pattern
Users can compile any pattern according to zoom ratio, rotate angle, normal repetition
or partial repetition to generate a new pattern and save it to memory. The newly generated
pattern can be used for embroidering, output or other operations.
(2)
Compiling the Combined Pattern
After setting the combined pattern, the system can compile that pattern to generate a
new one and save it to memory. The newly generated pattern can be used for embroidering,
output or other operations.
16.
Letter Pattern
There are 28 built-in font libraries. Users can make letter groups and change letter
orders according to different tasks. This operation is vivid, simple and easy managing.
17.
Pattern Edit (under developing)
18.
Speed Adjustment
The highest speed for embroidery can be preset. During embroidery, speed may change
automatically along with the change of needle interval.
19.
Thread-trimming
Thread-trimming can be manually operated. The machine can trim the thread
automatically at the end of embroidery process or at color-changing.
20.
Thread-breakage Detection
