— 53 —
5.8 GEARBOX MATCH
After changing the gearbox or changing the gearbox ECU, you need to use the gearbox
matching function to re-match the engine and the gearbox.
Before resetting the gearbox, please check the gearbox control unit to ensure that there is no fault
code. If there is a fault code, the gearbox memory function cannot be reset. Please road test after reset.
The operation guidelines of the Gearbox Matching function are shown as below:
1.
Enter the
Gearbox matching
menu and choose relevant models according to the
vehicle being tested.
2.
Enter the
Reset adaptive value
menu.
3.
Turn on the ignition without starting the engine.
4.
Read the note and press
OK
to continue the Gearbox Matching function.
Figure 5-26 Sample of gearbox matching function (screen 1)
5.
Wait until the message ‘
Successful operation
’ pops up.
