XTline XT60616, Original Instruction Manual

Page: 31 / 34

• The mode change button is backlit in
green
or
red
shortly after being pressed. The green
color means that the battery capacity is at a sufficient level (more than 25%). The red color
indicates a low remaining charge level (less than 25%) and the battery needs to be
charged.
• If you need to extend the lighting time, set any mode and press and hold the button until
the emitted light gradually dims. The button backlight color will change from red to green .
If the color has not changed, it means that the battery is almost empty - let the battery
recharge.
OPERATING INSTRUCTIONS
•
Avoid dropping the light on the ground and contact with sharp objects and heat sources.
In particular, avoid any damage to the transparent light cover.
•
The flashlight may heat up during operation, lighting or charging. We do not recommend
continuous operation - the lamp may get damaged. Never cover the flashlight while
operating or charging.
•
Never point the light beam directly into the eyes of other people or animals.
•
If you use or charge the light at temperatures below 0 ̊ C or above 40 ̊ C, the performance
of the device may decrease.
•
Protect the flashlight from water and rain.
•
The flashlight may only be operated and used by persons who have familiarized
themselves with all the instructions given in this user manual, with sufficient qualifications
and in compliance with all safety instructions and regulations valid and applied at the time.
CHARGING INSTRUCTIONS
•
Use only the original charger recommended and supplied by the manufacturer.
• Make sure the power supply values match the work light’s specifications. Turn off the light
before charging. Connect the power cord to the light connector and plug the power cord into
a power outlet.
•
Charge the flashlight whenever you notice a decrease in the intensity of the emitted light.