XTline XT130512, Original Instruction Manual

Page: 45 / 50

INDIVIDUAL MEASURING
After switching the device on, the measurement mode of
individual
values is automatically preset.
A) Press the button (1)
B) A red laser beam will light up. Aim the beam at the target you want to measure the distance
from.
C) Then press the button (1) again and the measured value will be displayed on the
bottom line of the display followed by an sound signal (
the value of 18 m in the picture
below ).
CONTINUOUS MEASURING
To set the continuous measurement mode, turn on the device and then hold the button (1)
A continuous measurement will be set, during which you can aim the laser beam at the target
object and the current measured value is regularly displayed in real time on the bottom line of the
display.
Along with the current measured value, the minimum and maximum values recorded by the
device during one measurement cycle are also displayed (
MIN
and
MAX
).
A) After starting the continuous measuring mode, the values are shown on the display.
B) To interrupt the measurement, press the button (1)
C) To carry on the continuous measuring, press button (1) again.
D) To return to the original measuring mode, press the button (7)
OTHER FUNCTIONS
The device offers the possibility of measuring and calculating area, volume and direct and
indirect measurement of vertical angles in the range of 0° to 90° (-90°) + Pythagorean theorem
function.