-
Use the switch to turn off. Remove the chuck after the grindstone fully
stops.
-
Check the grinding results.
Tip shaping (wood drill bits)
-
Connect the tool to a power supply.
-
Use the switch to turn on.
-
Insert the chuck with the drill bit into the tip shaping hole (5). Then,
rotate the chuck lightly pressing to the left and right stop until the grinding
noise gradually decreases. Remove the chuck from the groove, rotate 180°
and repeat.
-
Use the switch to turn off. Remove the chuck after the grindstone fully
stops.
-
Check the shaping results.
