USING
FUNCTIONAL DESCRIPTION
Caution
:
•
Always be sure that the tool is switched off and unplugged before adjusting or checking
function on the tool
Adjusting bit protrustion
1. Bit protrustion
2. Tool base
3. Scale
4. Locking lever
5. Ajusting screw
6. Hex nut
To adjust the bit protrustion, loosen the locking lever and move the tool base up or down as desired
by turning the adjusting screw. After adjusting, tighten the locking lever for only secure the tool
base.
Note
:
When the tool is not secured even if the locking lever is tightened. Tighten the hex nut and then
tighten the locking lever.
Switch action
1. Switch
2.
OFF (O)
3.
ON (I)
Caution
:
•
Before plugging in the tool, always check to see that the tool is switched off.
To start the tool, press "on" (I) side of the switch
To start the tool, press the "off" (O) side of the switch.
Electronic function
The tool equipped with electronic function are easy to operate because of the following features.
Constant speed control
Electronic speed control for obtaining constant speed. Possible to get fine finish, because the
rotating speed is kept even load condition.
Soft-start
Soft-start feature minimizes start-up shock, and makes the tool start smoothly.
