Caution
:
•
If the tool is operated continously at low speeds for long time, the motor will get overloaded,
resulting in tool malfuction.
•
The speed adjusting dial can be turned only as far as 6 and back to 1. Do not force it past 6
or 1, or the speed adjusting function may no longer work.
Assembly
Installing or removing trimmer bit
1. Tighten
2. Loosen
3. Hold
Speed ajusting dial
1. Speed adjusting dial
The tool speed can be changed by turning the speed adjusting dial to a given number setting
from 1 to 6. Higher speed is obtained when the dial is turned in the direction of number 6.
And lower speed is obtained when it turned in the direction of number 1.
This allows the ideal speed to be selected for optimum material processing, i.e. the speed can
be correctly adjusted to suit the material and bit diameter. Refer to the table for the
relationship betwee the number setting on the dial and the approximate tool speed.
1. Tighten
2. Loosen
3. Shaft lock
Caution
:
•
Do not tighten the collet nut without inserting a bit, or the collet cone will break.
•
Use only the wrenches provided with the tool.
Insert the bit all the way into the collet cone and tighten the collet nut securely with the two
wrenches or by pressing the shaft lock and using the provided wrench. To remove the bit.
Follow the instalation procedure in reverse.
OPERATION
Fo the trimmer base
1. Dust nozzle
2. Thumb screw
3. Trimmer base
