Sanding
Place the machine on the material such that the sanding belt is parallel to the surface of
the workpiece.
When working, ensure that the machine is operated at right angles to the pipe so that the belt does not
fall off the rollers.
Using the additional handle, the belt can be pressed against the pipe and at same time placed around it.
The angle of contact and the cutting output may be changed by the
contact pressure.
Keep the machine in constant motion because otherwise recesses could be produced in
the material.
When the operation is complete. Switch the tool off and allow to cool before storing.
Cleaning and maintenance
Motor cleaning: blow compressed air through the rear ventilation slots of the machine regularly,
frequently and thoroughly. Here, the machine must be held firmly.
Repairs
Repairs to electrical tools must be carried out by qualified electricians.
lf you have electrical tools that require repairs, please contact the place of purchase.
Summary of Contents for XT105340
Page 8: ...Sch matick pohled...
